Keep one Apple Reminders list in step with your tasks in both directions, find tasks archived inside projects from the sidebar's Archive, duplicate a project with every task unchecked, and Shortcuts' Add Task now opens the task it made.
Sync with Reminders: a new switch in Settings ▸ Sync ▸ Apple Reminders keeps one Reminders list in step with Kan Do. Your open tasks appear in the list, and a reminder you add to it becomes a task in the Inbox. Title, due date, priority, and checking off travel both ways, so a task ticked off in Reminders is done in Kan Do too. It's off until you turn it on (user request)
Choose what goes across: Tasks to Sync is All Tasks or only Tasks with a Date
Nothing is deleted by surprise: deleting a reminder never deletes its task, and Kan Do stops and tells you if most of the list goes missing at once
Turn it on on one device. Your other devices get the changes through iCloud as usual. See Sync with Apple Reminders
Tasks archived in projects show in the sidebar's Archive: the box at the top of the sidebar listed archived projects and loose tasks only, so it could read "Nothing Archived" while your projects held plenty. It now has an Archived in Projects section, grouped by project, with Restore and Delete for each task (user report)
Duplicate, All Tasks Unchecked: a second button when you duplicate a project makes the copy with every task and subtask open again and archived tasks back on the board, ready to run a checklist a second time (user request)
The + beside Add task: tapping the plus at the bottom of a column puts the cursor in the field. With a title already typed, it adds the task (user request)
Due Date in the selection bar: tap Select, pick the tasks, then tap Due Date in the bar at the bottom to move them all to Today, Tomorrow, Next Week, or a date you pick. It was only in the press-and-hold menu before. Good for the end of the day, when what's left needs to go to tomorrow (user request)
Select works in Board Layout: with Today, Upcoming, or a custom smart list shown as a board, Select now picks cards, and ⌘-click picks them on the Mac. Before, the bar appeared but the cards could not be picked
Snooze 15 Minutes: a new button when you press and hold a reminder, above Snooze 1 Hour. It brings the same reminder back in fifteen minutes and leaves the task's date alone (user request)
Subtask reminders have the snooze buttons: a subtask's reminder offered Mark Done only. It now has all four snoozes, like a task's
Open Task After Creating opens the task: Add Task with this switch on could bring Kan Do forward on the screen you were last on. It now opens the new task (user report)
The comment box stays above the keyboard: on a task with subtasks and a few comments, the box you type in slid under the keyboard from about the third comment on, on iPhone and on both screens of iPhone Duo. The subtasks and the comments now make room and scroll, the newest comment stays beside the box, and the close button no longer sits on the send arrow (user report)
Typing in the note on a task that shows subtasks and comments keeps the note in view above the keyboard
Return on a hardware keyboard posts the comment, and Return on an empty comment box puts the keyboard away
Swipe from the left edge for the sidebar: on the open inner screen, and on a large iPhone turned sideways, a swipe in from the left edge brings back the hidden sidebar (user request)
Repeat a task on the weekdays you choose or on the third Saturday of the month, see Upcoming and your own smart lists as boards by project or by day, keep a page of Markdown notes for each project, pause a moment before a completed task leaves, and the Default View setting now applies to projects.
Repeat on the days you choose: under Repeat ▸ Custom ▸ Weekly, the seven days of the week are buttons. Turn on any mix, such as Sunday, Wednesday, and Saturday, and one task repeats on each of them (user request)
Repeat by place in the month: under Repeat ▸ Custom ▸ Monthly, On The offers First, Second, Third, Fourth, or Last plus a weekday, for repeats like "the third Saturday of the month" (user request)
Unchecking a repeating task puts everything back: checking one off by mistake and unchecking it right away used to leave a second copy on its next date and a task that no longer repeated. The task now comes back with its repeat, and the extra copy is taken away
A device still on an older version shows tasks with these two new repeats as not repeating until it updates
Board Layout for Upcoming and your own smart lists: the Sort and Filter menu's Board Layout, until now only in Today, shows any of them as cards in columns. Columns chooses By Project, or By Day with each day's cards under their project's name, so a "This Week" list becomes a week planner (user request)
Today's board by time of day: with Group by Time on, Today's board columns are Overdue, Morning, Afternoon, Tonight, and Any Time instead of projects (user request)
Calendar Column Last: moves the board's Calendar column to the right of your tasks (user request)
Project Notes: a page of notes for each project, in its ⓘ menu. Write the project's goals, key dates, people, and links in Markdown, then tap Read to see it as a formatted page with headings, lists, checkboxes, and working links. It is the project's existing Notes text, so it syncs as before (user request)
Default View applies to projects: with Settings ▸ Appearance ▸ Boards & Lists ▸ Default View set to List, projects still opened as boards. They now open the way the setting says; a project you switch yourself keeps its view (user report)
Completed Tasks Leave: a new setting in Settings ▸ Appearance ▸ Tasks keeps a checked-off task where it is for 3 or 5 seconds before it leaves a list. Tap its circle again while it waits to uncheck it (user request)
Hide Completed Subtasks: a new switch in Settings ▸ Appearance ▸ Tasks takes checked-off subtasks out of the list, with a "Show" line to bring them back. A repeating task keeps showing them until the task itself is done (user request)
The first version of HomeNom. A recipe box for iPhone and iPad: save recipes from Safari, from reels and videos, or from your own notes, sort them into lists and tag them, and open any of them on HomeView in its step-by-step cooking view.
Battery levels. Tiles for locks, sensors, blinds and thermostats that run on batteries now show the battery level, and it turns red when the battery is low. Choose Always, When Low or Never with Accessory Batteries in Settings.
Dim sooner. Dim After now offers 20 and 30 seconds.
Camera tiles stay current. HomePad now notices when a camera’s live feed has stalled or never started and brings it back, and a tile that is showing a snapshot gets a new one every 20 seconds instead of every minute.
Music scenes. Scenes made in the Home app that only play or stop music on a HomePod or Apple TV now appear when you add a scene.
If a scene can’t run, its tile now says “Didn’t Run” instead of showing a checkmark.
Active scenes. A scene tile now reads “Active” when every accessory it controls is already set the way the scene leaves it, so you can see at a glance whether Good Night is in effect.
Tile colors. Give any tile its own color from its edit menu. It shows a tint of that color while off and fills with it while on.
Dark active tiles. A new Active Tiles setting makes tiles that are on turn dark instead of white, so a bedside iPad doesn’t light up the room. Choose White, Dark or Color in Settings.
Center tile content. Turn on Center Tile Content in Settings to center icons and names on every tile, or set the alignment per tile from its edit menu.
Tiny tiles. A new Tiny size, a quarter of Small, fits more lights and switches on one screen.
Fixed the green checkmark that could stay on a scene tile after running it.
iPhone and iPad: delete from the Stash keyboard. Touch and hold any item in the keyboard, then tap Delete. It moves to Trash, the same as deleting in the app. Tap Undo right there if you change your mind, or restore it from Trash later.
Mac: open from the menu bar. In Settings › General › Menu Bar, pick a key to hold — Option, Control, Shift or Command. Holding it while choosing an item in the menu bar opens the item instead of copying it: links in your browser, photos, GIFs and documents in their default app, text snippets in Stash. It works with Return in menu bar search too.
Breath Control now acts after leveling, so the target is the level a breath has in the finished file. Before, leveling raised breaths back up by as much as it raised the speech.
It also finds more breaths, including bright, hissy ones and breaths in long pauses, and leaves short soft consonants alone.
The leveler holds its gain through long pauses. Breaths, room tone and a quick "yeah" while someone else is talking are no longer lifted to full volume.
Settings › Mouth De-click: repairs lip smacks and saliva clicks before leveling while leaving the words intact. Sensitivity (4 suits most close-miked speech), a frequency skew toward low or high frequencies, and click widening.
Settings › Breath Control: finds breaths between phrases and turns them down, either to a target level in dBFS or by a fixed amount, never below the room tone. Sensitivity sets how soft a breath it will catch.
Both have an "output only" switch that saves just the removed clicks or breaths, without leveling, so you can hear exactly what is being taken out.
Both are off by default, keep the output sample-aligned with the video, and add only a second or two per hour of audio.
The Settings window now fits the screen and can be made taller or shorter; the settings scroll when it is shorter than they are.
First release. Four Shortcuts actions: Get Hinge Angle and Get Hinge Status for a phone that folds, and Get Tilt Angle and Get Tilt Status for every iPhone and iPad.
All four work with Siri. Turn off Return to Shortcuts in an action for automations and the Action Button.
Open the app to watch the live hinge and tilt angles, with diagrams that move as you fold or tilt the device.
Choose a key in Settings › Key: any root from C to B, major or natural minor. The zones, their labels and the notes they play follow.
Choose how many zones share the screen: one octave (8 notes) up to 12. The screen divides evenly and the colours spread across the same warm-to-cool run.
On the MacBook Pro with Touchscreen, taps now play every zone. Reading a touchscreen touch's trackpad-only position raised an internal AppKit error that silently swallowed the tap; the app no longer reads it.
Every zone makes a sound. The nine samplers were all wired to a filter with a single input, so only the top one was connected; a mixer now sums them.
A trackpad click on the overlay no longer stops screen touches.
The Apple logo pulse is the right way round: it rests dark while Music Touch is on, lights the instant a note is struck and goes dark as the note starts to fade. macOS offers no dimming for the logo, so it switches rather than fades; the Blink length slider is gone.
The Settings window has a fixed width and can be resized vertically.
Notes are now placed from the touch's position on the screen surface rather than its reported view location, so every zone plays, not just the top one.
Settings › Apple Logo has a Blink length slider, from 0.05 to 1.5 seconds, so the dark interval can be tuned to how fast the logo itself fades.
Settings › Status shows the raw coordinates of the last touch, to help diagnose mapping on real hardware.
A timeline runs across the bottom of the editor: the captions as blocks over a filmstrip of the video, with the playhead through both. Drag a block to move a caption, or drag either edge to change how long it stays on screen; blocks stop at their neighbours and snap to them and to the playhead, and the words inside keep their timing in proportion.
Click a block to select it in the list and jump there; right-click (long-press on iPhone and iPad) to edit its timing or delete it. Drag the ruler to scrub.
Zoom with ⌘-scroll or the −/+ slider on the Mac (pinch on iPhone and iPad). Hide and show the timeline from the toolbar or the View menu (⌥⌘T), and drag the handle above it to change its height.
Speakers: turn on Speakers in the inspector (or the Captions sheet on iPhone and iPad) and Captioner listens for who is talking and colors each caption by voice: yellow, cyan, green and magenta for up to four speakers. Let it count the voices itself or tell it how many there are; any caption's speaker can be changed by hand, and the four colors are part of the style. The first use downloads a 22 MB speaker model; after that it works offline.
Watermark: add a logo or handle over the video with its own opacity, size, margin and a nine-spot position grid. New videos start with the last watermark you used.
Choosing specific cameras or home accessories on your iPhone now works on the Apple TV. The TV matches your picks by name, so the Cameras and Home panels show exactly what you chose instead of going empty.
Changes made in the Home picker reach the TV right away.
First release. A status board for your Apple TV: clock, agenda, reminders, weather, and your HomeKit cameras, locks and sensors, over a wallpaper you choose, set up from your iPhone.
Fixes "HTTP Error 403: Forbidden" and "The page needs to be reloaded" on some YouTube videos: the bundled yt-dlp is now the 2026.10.10 nightly build, which switches to a YouTube client that still works.
Update yt-dlp… now checks yt-dlp's nightly builds as well as its releases and installs whichever is newer, so future YouTube fixes arrive without waiting for a release.
A Download Video action for Shortcuts
Give the action a link from YouTube, Vimeo, TikTok, Instagram, X or any of the hundreds of sites yt-dlp supports, or a direct link to a media file, and it hands the video file to the next action: Save File, Share, Quick Look, Save to Photos, Transcriber, Captioner.
Quality: Highest quality, 4K, 1080p, 720p, 480p, or Audio only, which returns an M4A.
Force MP4 (on by default) delivers a file QuickTime and Photos play. Video the Mac already plays from an MP4 (H.264, HEVC, and AV1 on M3 and later) is repackaged in seconds; VP9 and anything else is converted to H.264 with the hardware encoder. On an M3 or later Mac, Highest quality brings down YouTube's 4K without a conversion.
Compatible MP4 (H.264) converts AV1 too, for files headed to older Macs, iPhones before the 15 Pro and other devices.
Update yt-dlp… in the app fetches the latest yt-dlp release, verifies it and uses it from then on, so a site change never needs a new version of the app.
The app updates itself: ShortVid ▸ Check for Updates…, plus a daily automatic check.
Bundles yt-dlp, ffmpeg and Deno inside the app, signed and notarized, with a layered app icon for macOS 26 and later. Requires macOS 27 or later and an Apple silicon Mac.
The cue being spoken now appears over the video as you play it, wrapped exactly as it will be in the SRT, so you can proofread subtitles the way viewers will see them.
Three looks in Settings › Subtitles: Classic (white with a shadow), Boxed (YouTube-style panel) and Outlined (bold with a black outline), with a live sample. View › Captions on Video (⇧⌘C) turns them off and on.
Swedish, Danish, Norwegian, Finnish, Dutch, Russian, Turkish, Polish, Czech, Greek, Hebrew, Arabic, Thai, Vietnamese and others are now in the language menu. Apple's newest engine doesn't cover them yet, so they go through Apple's earlier on-device dictation model, marked “dictation model” in the menu: still private and offline, a little less accurate.
Converting to AVIF now uses libavif and libaom, bundled inside the app, instead of the encoder built into macOS. Apple's encoder splits images larger than 512 pixels into a grid of tiles, which Firefox cannot display; the new files are single images that every browser opens.
The AVIF quality setting now means the same thing as in Squoosh and avifenc, so files come out around half the size they did at the same number.
AVIF output no longer carries EXIF metadata; the orientation is applied to the pixels instead.
A new Convert menu in the toolbar (also in Settings › Convert and the Optimize menu) re-encodes every dropped image in the format you pick before optimizing. AVIF gives the smallest files; the encoder is the one built into macOS, so nothing else is installed.
With a format chosen, HEIC, WebP, TIFF and BMP files can be dropped too, and folder drops pick them up.
The converted file takes the original's name with the new extension; the original goes to the Trash so Revert to Original still works, or keep it with a switch in Settings.
Converted JPEGs and PNGs are then run through the usual optimizers. Animated GIFs and SVGs stay in their own format.
New text size and line height settings in Settings › Appearance. They apply to the main menu and every folder's shortcuts, and shortcut icons scale with the text.